搜索
确认
取消

PRODUCTS

All categories

Cold construction type one-component non-curing waterproof coating

QQ图片20191023151941
The cold-worked one-component non-curing waterproof coating is a new type of non-curing waterproof coating that can be directly applied without heating. The product does not cure after molding, has good creep, adhesion, elongation and self-healing properties, can adapt to cracking, vibration, displacement of the building base layer, and maintain the performance of the waterproof layer. The material is solvent-free and other toxic substances, and is a high-quality waterproof material with strong operation and wide application.

Product description

产品介绍
冷施工型单组分非固化防水涂料是一种新型非固化防水涂料,不需加热即可直接进行刮涂。产品成型后不固化,具有良好的蠕变性、粘结性、延伸性及自愈性,能够适应建筑基层的开裂、震动、位移,维持防水层性能。且材料不含溶剂及其它有毒物质,是操作性强、适用面广的优质防水材料。
 
产品特点
● 单组分材料,施工方便、安全,相对于其他非固化材料需要设备加热、可操作时间短而言,本产品无需加热,无需设备,操作要求低,克服了传统非固化防水涂料加热带来的安全风险以及双组分材料调配混合带来的不便。
●同等重量下,本产品具有更大体积,在实际施工中可涂刷更大的作业面。
●可在潮湿基面施工,且具有良好的耐酸碱、耐热、耐老化性能。
●粘结性能优异,可与基面达到100%满粘,有效防止窜水;同时能够粘结各种卷材,适用面广。 
 
运输贮存
1、本产品为非易燃易爆材料,可按一般货物运输。运输中应防晒、防冻、 防止雨淋、挤压、碰撞,保持包装完好无损。
2、本产品存放时应保证通风、干燥、防止阳光直接照射,贮存温度应在 5~35℃。
3、保质期:6个月。
 
适用范围
● 建筑物平屋面、彩钢屋面、天沟、雨棚及不规则的屋面防水工程。
● 地下建筑防水工程,如地下室混凝土底板、顶板等。
● 各种平面防水维修工程。 
● 建筑物其它防水工程,如卫生间、厨房、游泳池、施工缝、伸缩缝、穿墙管、落水口等。
 
参考用量
1.0mm 涂膜,涂料用量约为1Kg/m2
 
包装规格
15L/桶   
 

Product description

The cold-worked one-component non-curing waterproof coating is a new type of non-curing waterproof coating that can be directly applied without heating. The product does not cure after molding, has good creep, adhesion, elongation and self-healing properties, can adapt to cracking, vibration, displacement of the building base layer, and maintain the performance of the waterproof layer. The material is solvent-free and other toxic substances, and is a high-quality waterproof material with strong operation and wide application.

Executive standard

 

Features

● One-component material, convenient and safe to construct. Compared with other non-curing materials, it needs equipment heating and short operation time. This product does not need heating, no equipment, low operation requirements, and overcomes the heating of traditional non-curing waterproof coatings. The safety risks and the inconvenience caused by the mixing of two-component materials.
● Under the same weight, this product has a larger volume, and it can apply a larger working surface in actual construction.
●It can be applied on wet base and has good acid and alkali resistance, heat resistance and aging resistance.
●Excellent bonding performance, 100% full adhesion to the base surface, effective prevention of water immersion; at the same time, it can bond various coils and is suitable for a wide range of applications.

Transport storage

1. This product is non-flammable and explosive material and can be transported as general cargo. Sun protection, antifreeze, rain, squeezing, and collision should be avoided during transportation to keep the packaging intact.
2. The product should be ventilated, dry and protected from direct sunlight when stored. The storage temperature should be 5~35°C.
3. Shelf life: 6 months.

Construction points

Scope of application

● Building flat roof, color steel roof, gutter, canopy and irregular roof waterproofing works.
● Underground building waterproofing works, such as basement concrete floor and roof.
● Various plane waterproof maintenance works.
● Other waterproofing works of buildings, such as toilets, kitchens, swimming pools, construction joints, expansion joints, wall pipes, water outlets, etc.

Reference dosage

1.0mm coating film, the coating dosage is about 1Kg/m2

Packing specification

15L/barrel

Precautions

Related videos

照片

视频

$data.productVideo.title

SERVICE HOTLINE

 

+86-400-870-9666

 

top

Copyright © Jiangsu Bonheal Chemical Technology Industrial Development Co., Ltd.  All Rights Reserved.  苏ICP备14034931号-1