Product description
产品介绍
水性喷涂持粘高分子防水涂料为A、B双组分涂料。其中,A组分是由合成树脂乳液、改性剂、增韧剂等助剂组成,B组分为破乳剂。该涂料采用专用设备喷涂,瞬间反应析水,快速形成持粘满粘防水涂层,适应基层变形能力强,有效解决窜水问题;待水分挥发干燥后,与各类防水卷材复合,可显著提高防水工程质量。适用于工业与民用建筑、桥梁、隧道等防水工程。
执行标准
Q/ JSBH 201-2018 《水性喷涂持粘高分子防水涂料》
产品特点
● 产品不含溶剂,绿色环保、通过JC1066-2008《建筑防水涂料中有害物质限量》水性A级检测;
● 常温喷涂,效率高,基面无明水即可施工;
● 成形后持续保持粘性,并具备蠕变及自愈性,可修复基层轻微裂缝;● 低温柔性及耐热性优异:低温-30℃不断裂,高温160℃不流淌。
● 立面与卷材组合施工,可保证涂料不流挂,卷材不脱坠,
运输贮存
1、本产品为非易燃易爆材料,可按一般货物运输。运输中应防晒、防冻、 防止雨淋、挤压、碰撞,保持包装完好无损。
2、本产品存放时应保证通风、干燥、防止阳光直接照射,贮存温度应在 5~35℃。
3、保质期:6个月。
注意事项
● 将基层砂粒、浮尘等清理干净,达到施工要求;基层若有孔洞、裂缝等,应先使用邦辉节点防水密封膏修补找平;
● 金属基层如有锈蚀,应使用邦辉首创固锈剂进行处理,待固锈剂表干后方可进行大面积喷涂施工;
● 阴阳角。女儿墙等特殊部位应使用邦辉节点防水密封膏以一布两涂的方式进行加强处理;
● 雨天、雪天、5级风以上不宜施工;
● 喷涂施工应采用十字交叉法,保证涂层厚度均匀;
● 施工现场严禁烟火,保持良好通风。
适用范围
地下工程防水:建筑地下室、地铁车站、隧道、市政地下综合管廊等。
屋顶防水:混凝土平屋面、坡顶屋面、金属屋面彩钢夹心保温板、石板瓦等。
地下通道、废水处理厂、游泳池内外防水及防腐。
参考用量
1.0mm 涂膜,涂料用量约为1.75Kg/m2
包装规格
50、200kg/桶
Product description
The water-based spray-holding polymer waterproof coating is a two-component coating of A and B. Among them, the component A is composed of a synthetic resin emulsion, a modifier, a toughening agent and the like, and the component B is a demulsifier. The coating is sprayed with special equipment to instantly react and analyze water, quickly form a sticky and sticky waterproof coating, adapt to the deformation ability of the base layer, and effectively solve the problem of drowning. After the water is evaporated and dried, it can be combined with various waterproof coils. Improve the quality of waterproof engineering. Suitable for waterproofing projects in industrial and civil buildings, bridges, tunnels, etc.
Executive standard
Q/ JSBH 201-2018 "Water-based sprayed sticky polymer waterproof coating"
Features
● The product does not contain solvents, is environmentally friendly, and passes the JC1066-2008 "Restriction of Hazardous Substances in Building Waterproof Coatings".
● Spraying at room temperature, high efficiency, no foundation water can be used for construction;
● Continue to maintain viscosity after forming, and have creep and self-healing properties to repair minor cracks in the base layer;
● Low temperature flexibility and heat resistance: low temperature -30 °C does not break, high temperature 160 °C does not flow.
● The construction of the façade and the coil material can ensure that the paint does not sag and the coil does not fall.
Transport storage
1. This product is non-flammable and explosive material and can be transported as general cargo. Sun protection, antifreeze, rain, squeezing, and collision should be avoided during transportation to keep the packaging intact.
2. The product should be ventilated, dry and protected from direct sunlight when stored. The storage temperature should be 5~35°C.
3. Shelf life: 6 months.
Construction points
Scope of application
Underground engineering waterproofing: building basement, subway station, tunnel, municipal underground integrated pipe gallery, etc.
Roof waterproofing: concrete flat roof, slope top roof, metal roof color steel sandwich insulation board, slate tile, etc.
Underground passage, wastewater treatment plant, waterproof and anti-corrosion inside and outside the swimming pool.
Reference dosage
1.0mm coating film, the coating dosage is about 1.75Kg/m2
Packing specification
50, 200kg / barrel
Precautions
● Clean the grassroots sand, floating dust, etc. to meet the construction requirements; if there are holes, cracks, etc. in the base layer, first use the Banghui node waterproof sealing paste to repair and level;
● If the metal base layer is rusted, it should be treated with Banghui's first rusting agent. After the rusting agent is dry, it can be sprayed in a large area.
● Yin and Yang angle. Special parts such as the parapet wall should be reinforced with a two-coating method using Banghui node waterproof sealing paste;
● It is not suitable for construction on rainy days, snow days or above 5 winds;
● Spraying construction should adopt the cross method to ensure uniform coating thickness;
● Fireworks are strictly prohibited at the construction site and well maintained.
Related videos
照片
视频
