Product description
产品介绍
喷涂橡胶沥青防水涂料是采用特殊工艺将乳化沥青与合成高分子聚合物、特种助剂等混合制成的高弹性防水涂料。本产品采用专用设备现场喷涂，改变了传统防水涂料现场人工配制、手工涂刷的施工方式，可瞬间形成致密、完整和连续的防水涂膜，并具有优秀的弹性恢复率、断裂伸长率，此外还具有良好的耐久性及粘结强度，是真正实现“皮肤式”防水的新型环保防水涂料。
产品特点
● 采用喷涂技术，施工效率高，成膜速度快，一次成膜，完美包覆基层；
● 实现无缝对接，无窜水层
● 超高弹性： 产品成型后具有较高的弹性和抗穿刺性能。
● 优良的耐热稳定性和抗低温柔性，应用环境温度为-30 ℃～80 ℃。耐酸碱、耐老化性能优越。
运输贮存
1、本产品为非易燃易爆材料，可按一般货物运输。运输中应防晒、防冻、 防止雨淋、挤压、碰撞，保持包装完好无损。
2、本产品存放时应保证通风、干燥、防止阳光直接照射，贮存温度应在 5～35℃。
3、保质期：6个月。
注意事项
● 将基层砂粒、浮尘等清理干净，达到施工要求；基层若有孔洞、裂缝等，应先使用邦辉节点防水密封膏修补找平；
● 金属基层如有锈蚀，应使用邦辉首创固锈剂进行处理，待固锈剂表干后方可进行大面积喷涂施工；
● 阴阳角。女儿墙等特殊部位应使用邦辉节点防水密封膏以一布两涂的方式进行加强处理；
● 雨天、雪天、5级风以上不宜施工；
● 喷涂施工应采用十字交叉法，保证涂层厚度均匀；
● 施工现场严禁烟火，保持良好通风。
适用范围
地下工程防水：建筑地下室、地铁车站、隧道、市政地下综合管廊等。
屋顶防水：混凝土平屋面、坡顶屋面、金属屋面彩钢夹心保温板、石板瓦等。
地下通道、废水处理厂、游泳池内外防水及防腐。
参考用量
涂层厚度为1.0mm时，理论用量约为1.75kg㎡。
包装规格
50、200kg/桶
Product description
Spray rubber asphalt waterproof coating is a high-elastic waterproof coating made by mixing emulsified asphalt with synthetic polymer and special additives. This product is sprayed on site by special equipment, which changes the traditional manual construction and manual painting of the traditional waterproof coating. It can form a dense, complete and continuous waterproof coating film instantly, and has excellent elastic recovery rate and elongation at break. In addition, it has good durability and bond strength, and is a new environmentally friendly waterproof coating that truly achieves "skin-type" waterproofing.
Executive standard
Features
● Spraying technology, high construction efficiency, fast film formation, film formation at one time, perfect coating of the base layer;
● Achieve seamless docking, no water layer
● Ultra-high elasticity: The product has high elasticity and puncture resistance after molding.
● Excellent heat resistance and low temperature flexibility, and the application temperature is -30 °C ~ 80 °C. Excellent acid and alkali resistance and aging resistance.
Transport storage
1. This product is non-flammable and explosive material and can be transported as general cargo. Sun protection, antifreeze, rain, squeezing, and collision should be avoided during transportation to keep the packaging intact.
2. The product should be ventilated, dry and protected from direct sunlight when stored. The storage temperature should be 5~35°C.
3. Shelf life: 6 months.
Construction points
Scope of application
Underground engineering waterproofing: building basement, subway station, tunnel, municipal underground integrated pipe gallery, etc.
Roof waterproofing: concrete flat roof, slope top roof, metal roof color steel sandwich insulation board, slate tile, etc.
Underground passage, wastewater treatment plant, waterproof and anti-corrosion inside and outside the swimming pool.
Reference dosage
When the coating thickness is 1.0 mm, the theoretical amount is about 1.75 kgm2.
Packing specification
50, 200kg / barrel
Precautions
● Clean the grassroots sand, floating dust, etc. to meet the construction requirements; if there are holes, cracks, etc. in the base layer, first use the Banghui node waterproof sealing paste to repair and level;
● If the metal base layer is rusted, it should be treated with Banghui's first rusting agent. After the rusting agent is dry, it can be sprayed in a large area.
● Yin and Yang angle. Special parts such as the parapet wall should be reinforced with a two-coating method using Banghui node waterproof sealing paste;
● It is not suitable for construction on rainy days, snow days or above 5 winds;
● Spraying construction should adopt the cross method to ensure uniform coating thickness;
● Fireworks are strictly prohibited at the construction site and well maintained.
Related videos
照片
视频
