搜索
确认
取消

PRODUCTS

All categories

Metal roofing acrylic high elastic waterproof coating

7副本
This product is an environmentally friendly polymer coating made of special emulsion combined with various functional additives. High-quality raw materials give the product a strong anti-ultraviolet, anti-aging function and elasticity, flexibility, water resistance, suitable for all kinds of metal roofing, direct exposed waterproof engineering, and can also be used in other roofing systems.

Product description

产品介绍
 本产品是一款由特种乳液结合多种功能助剂制作而成的环保型高分子涂料。优质的原料赋予了产品极强的抗紫外线、抗老化功能及弹性、柔性、抗水性,适用于各类金属屋面、直接外露的防水工程,也可用于其他屋面系统。
 
 
执行标准
 JG/T 375-2012 《金属屋面丙烯酸高弹防水涂料》
 
 
产品特点
 ● 防紫外线,抗老化性能优越。
 
● 搭配邦辉固锈剂使用,替代传统除锈打磨工序,省时省工,提升防水效果;
 
● 粘结强度高,与基材紧密粘接。
 
● 低温柔性好,-30℃对折无裂纹。
 
● 抗酸碱能力强,抑制霉菌及藻类生长。
 
● 具有良好的透气性,不起鼓、不起皮。
 
● 防水性好,耐积水能力强 。
 
 
运输贮存
 1、本产品为非易燃易爆材料,可按一般货物运输。运输中应防晒、防冻、 防止雨淋、挤压、碰撞,保持包装完好无损。
 
2、本产品存放时应保证通风、干燥、防止阳光直接照射,贮存温度应在 5~35℃。
3、保质期:12个月。
 
 
施工要点
 1、基层处理:基层应平整、坚实、干净、无明水、无浮灰和油污,对基层有裂缝以及管根留设的凹槽,应先嵌填邦辉节点防水密封膏。
 
2、金属基层如有锈蚀,采用邦辉首创的固锈剂进行处理,形成免除锈金属屋面维修翻新系统;
 
2、局部处理:在大面积防水层施工前,阴阳角、管道根等节点处先涂刷2~3遍涂料,当采用增铺一层胎体增强材料时,胎体应夹在涂膜中间。
 
3、大面施工时,宜采用喷涂,分2~3遍,达到规定厚度,每道涂层表面干燥后方可进行下道施工,喷涂应采用十字交叉法。
 
 适用范围
 适合直接外露防水工程,尤其适用于彩钢屋面。
 
 参考用量
 涂层厚度为1.0mm时,理论用量约为1.5kg/㎡。
 
 包装规格
 18kg/桶   
 
 注意事项
 本产品施工温度为5℃~35℃。防水涂膜应在基层坚实以后施工。在通常情况下,料拌好后应在30分钟内用完。

Product description

This product is an environmentally friendly polymer coating made of special emulsion combined with various functional additives. High-quality raw materials give the product a strong anti-ultraviolet, anti-aging function and elasticity, flexibility, water resistance, suitable for all kinds of metal roofing, direct exposed waterproof engineering, and can also be used in other roofing systems.

Executive standard

JG/T 375-2012 "Metal roofing acrylic high elastic waterproof coating"

Features

● UV protection and excellent anti-aging properties.
● It can be used with Banghui rusting agent to replace the traditional rusting and polishing process, saving time and labor and improving waterproof effect.
● High bonding strength and tight adhesion to the substrate.
● Low temperature flexibility, no crack at -30 °C.
● Strong acid and alkali resistance, inhibiting mold and algae growth.
● It has good air permeability, can't afford drums and can't be skinned.
● Waterproof and resistant to water accumulation.

Transport storage

1. This product is non-flammable and explosive material and can be transported as general cargo. Sun protection, antifreeze, rain, squeezing, and collision should be avoided during transportation to keep the packaging intact.
2. The product should be ventilated, dry and protected from direct sunlight when stored. The storage temperature should be 5~35°C.
3. Shelf life: 12 months.

Construction points

1. Base treatment: The base layer should be flat, solid, clean, free of clear water, no floating ash and oil stains. For the cracks in the base layer and the grooves left in the tube root, the waterproof sealant of Banghui node should be embedded first.
2. If the metal base layer is rusted, it will be treated with the rust agent pioneered by Banghui to form a rust-free metal roof repair and renovation system.
2, local treatment: before the construction of large-area waterproof layer, the yin and yang angle, pipe root and other nodes first brush 2 ~ 3 times paint, when using a layer of carcass reinforcement material, the carcass should be sandwiched in the middle of the film .
3. When the large surface is constructed, it should be sprayed, divided into 2 to 3 times to reach the specified thickness. After the surface of each coating is dry, the next construction can be carried out. The spraying method should adopt the cross method.

Scope of application

Suitable for direct exposed waterproofing, especially for color steel roofing.

Reference dosage

When the coating thickness is 1.0 mm, the theoretical amount is about 1.5 kg/m2.

Packing specification

18kg/barrel

Precautions

The construction temperature of this product is 5 °C ~ 35 °C. The waterproof coating should be applied after the base layer is solid. Under normal circumstances, the material should be used up within 30 minutes after mixing.

Related videos

照片

视频

$data.productVideo.title
None

SERVICE HOTLINE

 

+86-400-870-9666

 

top

Copyright © Jiangsu Bonheal Chemical Technology Industrial Development Co., Ltd.  All Rights Reserved.  苏ICP备14034931号-1